Fluke 717-500G Pressure Calibrator Repair

Description

Fluke 717-500G Pressure Calibrator Repair

The Fluke 717 is a pressure calibrator — it measures pressure with a built-in sensor (500 psi/g range) plus the mA loop signal, and supplies loop power, to calibrate pressure transmitters and instruments in the field. Its precision lives in the internal pressure sensor and the mA measurement/source circuit, which is where service and calibration focus.

FlukeMeterRepair.com repairs and calibrates the Fluke 717-500G for process and instrument-calibration technicians.

Common Fluke 717-500G problems we fix

• Internal-pump wear — a worn pump/seal (on models with a pump) that stops it generating or holding pressure, serviced.
• Pressure-sensor drift — the internal sensor drifting out of spec, recalibrated against standards.
• Over-pressure damage — sensor damage from an over-range event, assessed and repaired.
• mA source/measure faults — the loop measurement or source drifting, recalibrated.
• Display or battery faults.

FAQs

My 717-500G reads pressure or mA wrong — fixable? Yes. Sensor and mA faults are repairable, then the calibrator is recalibrated so pressure and loop signals are accurate, with a NIST-traceable certificate.

Is the full range verified? Yes — pressure and mA are checked against our standards.

Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or request service.