Fluke 9170-C-156 Repair

Description

Fluke 9170-C-156 Metrology Well Calibrator Repair

The Fluke 9170-C-156 (Hart Scientific) is a configuration of the 9170 metrology-grade dry-well temperature calibrator — it heats and cools a precision insert block to highly stable, accurate temperatures with low gradients to calibrate temperature sensors (this C/156 configuration). Its precision depends on the heating/cooling system, the temperature control and reference sensor, and the insert/dry block, which is where service focuses.

FlukeMeterRepair.com repairs and calibrates the Fluke 9170-C-156 for calibration labs and metrology teams.

Common Fluke 9170-C-156 problems we fix

• Heating-element failure — won’t reach the setpoint, the heater repaired/replaced.
• Cooling-module degradation — won’t reach or hold low setpoints, the cooling module serviced.
• Stability / gradient faults — control-loop faults, corrected.
• Temperature-controller drift — the controller or reference sensor reading the wrong setpoint, recalibrated against standards.
• Display or interface faults.

FAQs

My 9170-C-156 won’t hold temperature or reads off — fixable? Yes. Heating/cooling and control faults are repairable, then recalibrated so block temperature is accurate and stable, with a NIST-traceable certificate.

Is stability verified? Yes — stability and ramp performance are verified against our reference standards.

Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or request service.