Fluke 6109A-156 Calibration Bath Repair

$245.00

Professional Fluke 6109A-156 repair by certified Fluke specialists. Trusted by temperature calibration labs, pharmaceutical manufacturing, food safety labs, and metrology departments nationwide. Nationwide service — ship from anywhere in the US.

Description

Fluke 6109A-156 Calibration Bath Repair

Dry wells and baths get judged on whether they reach a setpoint. That is the easy part – holding it evenly is what the instrument is actually for. FlukeMeterRepair.com works on Fluke instruments and nothing else, which means the Fluke 6109A-156 Calibration Bath is not an unfamiliar model to us.

Symptoms we see on the Fluke 6109A-156 Calibration Bath

It will not get down to the low end of its range – the cooling path, which fails independently of the heater.
The temperature hunts around the setpoint instead of settling.
A probe will not come out of the insert cleanly.
The stirrer is noisy or has stopped turning.
It reaches temperature but probes still disagree – uniformity across the well, which the display cannot show you.
It takes far longer to heat than it used to.

What the repair involves

Stability and uniformity are measured across the well rather than at a single point, because a source at the right average temperature can still vary enough between positions to move a reading. Heating and cooling paths are tested independently. Everything is repaired at component level rather than by swapping assemblies, and the measured results come back with the instrument.

Before you ship it

Send the inserts you use. Bore condition and fit affect thermal contact directly, and an instrument verified with the wrong insert has been verified for someone else’s setup.

Evaluation is free and you get a firm quote before any work starts. Every repair carries a 90-day parts-and-labor warranty. Email us or use the repair request form.