Fluke 717-5000G Pressure Calibrator Repair

$245.00

Expert Fluke 717-5000G repair and calibration with documented test results. Our repair process covers diagnostics through final pressure generation verification. Nationwide service — ship from anywhere in the US.

Description

Fluke 717-5000G Pressure Calibrator Repair

The Fluke 717 is a pressure calibrator — it measures pressure with a built-in sensor (5000 psi/g high range) plus the mA loop signal, and supplies loop power, to calibrate pressure transmitters and instruments in the field. Its precision lives in the internal pressure sensor and the mA measurement/source circuit, which is where service and calibration focus.

FlukeMeterRepair.com repairs and calibrates the Fluke 717-5000G for process and instrument-calibration technicians.

Common Fluke 717-5000G problems we fix

Pressure-generation faults — the pump/generation not building or holding pressure, serviced.
Pressure-measurement drift — the internal sensor drifting out of spec, recalibrated against standards.
Over-pressure damage — sensor damage from an over-range event, assessed and repaired.
mA source/measure faults — the loop measurement or source drifting, recalibrated.
Display or battery faults.

FAQs

My 717-5000G reads pressure or mA wrong — fixable? Yes. Sensor and mA faults are repairable, then the calibrator is recalibrated so pressure and loop signals are accurate, with a NIST-traceable certificate.

Is the full range verified? Yes — pressure and mA are checked against our standards.

Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or request service.