Fluke 717-1G Pressure Calibrator Repair

Description

Fluke 717-1G Pressure Calibrator Repair

The Fluke 717 is a pressure calibrator — it measures pressure with a built-in sensor (sensitive 1 psi/g low range) plus the mA loop signal, and supplies loop power, to calibrate pressure transmitters and instruments in the field. Its precision lives in the internal pressure sensor and the mA measurement/source circuit, which is where service and calibration focus.

FlukeMeterRepair.com repairs and calibrates the Fluke 717-1G for process and instrument-calibration technicians.

Common Fluke 717-1G problems we fix

• Low-pressure sensor drift — the sensitive low-range sensor drifting out of spec, recalibrated against standards.
• Over-pressure damage — the sensitive low-range sensor damaged by an over-range event, assessed and repaired.
• Pump / pressure-hold faults — the pump or seals not holding low pressure, serviced.
• mA source/measure faults — the loop measurement or source drifting, recalibrated.
• Display or battery faults.

FAQs

My 717-1G reads pressure or mA wrong — fixable? Yes. Sensor and mA faults are repairable, then the calibrator is recalibrated so pressure and loop signals are accurate, with a NIST-traceable certificate.

Is the full range verified? Yes — pressure and mA are checked against our standards.

Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or request service.