Fluke 6242-7M Pressure Calibrator Repair

Description

Fluke 6242-7M Pressure Calibrator Repair

The Fluke 6242-7M is an industrial pressure calibrator/controller — a benchtop system that generates, controls, and measures pressure with interchangeable precision modules and an integrated pump/controller, for automated calibration of pressure instruments. As a control-and-measure pressure system, its faults concentrate in the pump and pressure-control valves, the precision modules, and the control electronics.

FlukeMeterRepair.com repairs and calibrates the Fluke 6242-7M for pressure-calibration labs and instrument shops.

Common Fluke 6242-7M problems we fix

• Leak-rate / pneumatic faults — leaks that stop it holding pressure or fail a leak-rate check, repaired.
• Pressure-module faults — a precision module drifting or not reading, recalibrated against standards.
• Pump / pressure-control faults — won’t reach or hold setpoint, the pump or control valves repaired.
• Control unstable — control-loop faults causing overshoot or hunting, corrected.
• Interface or display faults.

FAQs

My 6242-7M won’t hold pressure or a module is off — fixable? Yes. Leak, pump, and module faults are repairable, then the modules are recalibrated so it controls and measures pressure accurately, with a NIST-traceable certificate.

Are the modules verified? Yes — checked against our reference standards.

Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or request service.